Developing high-performance Li-S batteries with high sulfur loading is highly desirable for practical application and remains a major challenge. To achieve this goal, the following requirements for designing carbon/metal compound composites need to be met (i) the carbon materials need to exhibit suitable specific surface area, void structure, and electrical conductivity; (ii) the weight content of the metal compounds should be low; and (iii) the metal compounds need to show a strong adsorption and efficient electrocatalytic function for LiPSs. In this study, inspired by the body structure of an octopus, a new carbon/NiS2 hierarchical composite is reported, in which the apical NiS2 nanoparticles (0D) on a 1D carbon nanotubes (CNTs) are supported on a three-dimensional carbon (3DC) framework (3DC-CNTs-NiS2). The 3DC-CNTs-NiS2 composite has a high specific surface area (271 m2 g-1), good electrical conductivity, and low NiS2 content (9.2 wt %), and the apical NiS2 nanoparticles are capable of adsorption and electrocatalysis toward LiPSs, demonstrated by both electrochemical characterization and theoretical calculation. When used as a cathode host of the Li-S battery, it exhibits an ultra-stable cycling performance with a fade rate of 0.043% per cycle over 1000 cycles; even with a high S loading (6.5 mg cm-2 with 90 wt % of S), the soft package battery delivers a high area capacity of 5.0 mAh cm-2 under the E/S ratio of 5 μLE mg-1s. This work provides a new approach to design and fabricate multi-functional S hosts with high S loading.Hydrogen peroxide (H2O2) production by electrocatalytic two-electron oxygen reduction shows promise as a replacement for energy-intensive anthraquinone oxidation or H2/O2 direct synthesis. Here, we report on graphene-supported Ni single-atom (SA) electrocatalysts, which are synthesized by a simple surfactant-free reduction process with enhanced electrocatalytic activity and stability. Unlike conventional Ni nanoparticles or alloy catalysts, the well-dispersed Ni-SA sites lack adjacent Ni atoms. This structure promotes H2O2 production by a two-electron oxygen reduction pathway under an alkaline condition (pH = 13). This catalyst exhibited enhanced H2O2 selectivity (&gt;94%) with a considerable mass activity (2.11 A mgNi-1 at 0.60 V vs reversible hydrogen electrode), owing to the presence of oxygen functional groups and isolated Ni sites. Density functional theory calculations provide insights into the role of this catalyst in optimizing the two-electron oxygen reduction reaction pathway with high H2O2 selectivity. This work suggests a new method for controlling reaction pathways in atomically dispersed non-noble catalysts.The current trend for smart, self-sustainable, and multifunctional technology demands for the development of energy harvesters based on widely available and environmentally friendly materials. In this context, ZnSnO3 nanostructures show promising potential because of their high polarization, which can be explored in piezoelectric devices. https://www.selleckchem.com/products/gant61.html Nevertheless, a pure phase of ZnSnO3 is hard to achieve because of its metastability, and obtaining it in the form of nanowires is even more challenging. Although some groups have already reported the mixing of ZnSnO3 nanostructures with polydimethylsiloxane (PDMS) to produce a nanogenerator, the resultant polymeric film is usually flat and does not take advantage of an enhanced piezoelectric contribution achieved through its microstructuration. Herein, a microstructured composite of nanowires synthesized by a seed-layer free hydrothermal route mixed with PDMS (ZnSnO3@PDMS) is proposed to produce nanogenerators. PFM measurements show a clear enhancement of d33 for single ZnSnO3 versus ZnO nanowires (23 ± 4 pm/V vs 9 ± 2 pm/V). The microstructuration introduced herein results in an enhancement of the piezoelectric effect of the ZnSnO3 nanowires, enabling nanogenerators with an output voltage, current, and instantaneous power density of 120 V, 13 μA, and 230 μW?cm-2, respectively. Even using an active area smaller than 1 cm2, the performance of this nanogenerator enables lighting up multiple LEDs and other small electronic devices, thus proving great potential for wearables and portable electronics.Electrochemical conversion of N2 to NH3 under ambient conditions is a promising and environmentally friendly route compared with the CO2-emitting and energy-intensive Haber-Bosch process. Nevertheless, due to ultrahigh stability of N2, it is urgent to explore efficient catalysts to weaken and activate the N≡N bond. Here, we report the Mo-doped iron phosphide (Mo-FeP) nanosphere as a valid transition-metal-based catalyst for electrochemical N2-to-NH3 fixation under ambient conditions. This catalyst exhibits excellent catalytic performance with a NH4+ yield rate (13.1 μg h-1 mg-1) and Faradaic efficiency (7.49%) at -0.3 and -0.2 V vs reversible hydrogen electrode (RHE), respectively. However, the FeP catalyst without doped Mo species displays weak catalytic performance. We found that the better catalytic performance of Mo-FeP might be due to the doping of Mo species, which is favorable for the polarization of adsorbed N2 molecules, making the N≡N bond more viable to dissociate.Ferroptosis is a type of cell death caused by the pathogenic accumulation of lipid hydroperoxides. Pharmacological mechanisms to induce ferroptosis may provide a way to kill cancer cells that are resistant to other forms of cell death like apoptosis. Nonetheless, the proteins that regulate ferroptotic sensitivity in cancer cells remain incompletely understood. Here, we screened a panel of inhibitors of serine hydrolases-an enzyme class important for regulating lipid metabolism-for potentiation of ferroptosis in HT1080 fibrosarcoma cells. We found that DO264, a selective inhibitor of the lyso- and ox-phosphatidylserine (PS) lipase ABHD12, enhances ferroptotic death caused by RSL3, an inhibitor of the lipid peroxidase GPX4. RSL3-induced ferroptosis was also potentiated by genetic disruption of ABHD12. Metabolomic experiments revealed that, in addition to elevated lyso-PS, ABHD12-inactivated cells show higher quantities of arachidonate (C204)-containing PS and 2-arachidonoyl glycerol, pointing to potential oxidation-sensitive lipid mediators of ferroptosis regulated by ABHD12.